Part Number: SAE380/47/2/25
Pack Size: 5 Units
Heavy-Duty Joist Hanger for Timber, Steel, Masonry & I-Joist Connections
The Simpson Strong-Tie SAE380/47/2 is a heavy-duty face-fix hanger, designed for high-strength applications where enhanced load support is required. Compatible with a wide range of header materials, including timber, steel, masonry, and I-joists, this versatile hanger supports structural timber with precision and durability.
With multiple nail and bolt fixing options, the SAE380/47/2 enables quick installation across a variety of construction scenarios. It is engineered to ensure structural integrity, and must be used with the hanger depth covering at least 60% of the supported joist height, unless additional lateral restraint is provided.
Key Features
-
Heavy-duty construction for strength-critical connections
-
Compatible with timber, I-joists, masonry, and steel headers
-
Multiple fixing options: square twist nails and bolt holes
-
Manufactured from 2.0mm pre-galvanised mild steel
-
Quick and simple installation with clear fixing guides
-
Complies with UK-DoP-e06/0270 and ETA-06/0270
Benefits
-
Prevents rotation of supported members when installed to recommended depth
-
Ideal for structural joinery in residential, commercial, or industrial framing
-
Highly durable finish for corrosion resistance
-
Reduces on-site installation time while ensuring code-compliant support
Technical Specifications
| Specification |
Value |
| Width (A): |
47mm |
| Joist Width Range: |
44mm – 47mm
|
| Height (B): |
101.5mm |
| Joist Height Range: |
117mm – 170mm
|
| Depth (C): |
88mm |
| Leg Width (D): |
41.5mm |
| Material Thickness (t): |
2.0mm |
| Header Fixing Holes: |
12 x Ø5mm, 2 x Ø11mm
|
| Joist Fixing Holes: |
7 x Ø5mm
|
Typical Applications
-
Floor and ceiling joists
-
Structural timber-to-masonry connections
-
Timber-to-steel frame integrations
-
I-joist support in engineered wood systems
Material Specification
-
Material: Pre-galvanised mild steel
-
Finish: Zinc-coated for corrosion resistance
-
Suitable for internal and covered outdoor use
Important Note
The hanger depth must be at least 60% of the carried member’s depth to prevent rotation unless additional top restraint is provided. Use only approved fixings in line with structural specifications and building regulations. For masonry use, fix with suitable bolts in designated Ø11mm holes.
